Melomania TouchCommon issuesHow do I pair Melomania Touch with my Apple Watch?
Melomania Touch

How do I pair Melomania Touch with my Apple Watch?

Please accept our apologies for the inconvenience but the Melomania Touch user guide is written with mobile phone users in mind as this is what our customers mostly use their earphones with. The pairing process is similar on other devices, but there are some differences so here are some instructions to help you.

Please note: that when pairing Melomania Touch to an Apple Watch, after the first earbud has connected, the second earbud will not send a pairing request in the way the user guide describes for pairing to a mobile phone.

Pairing after reset:

  1. Turn on Bluetooth on selected device.

  2. Remove earphones from charging case and check pairable devices list in Bluetooth settings.

  3. Select Melomania Touch L or R to begin connection process.

  4. Wait for voice prompt “Melomania Paired” followed by “Melomania Connected”.

  5. Select audio playback app.

  6. Enjoy listening to your favourite music through the Melomania Touch!

  7. When you are finished with using Melomania Touch, place back in corresponding side in charging case.

  8. If the LEDs slowly fade in and out in red, your Melomania Touch are correctly sat in case.

  9. Removing from the case will initiate auto connection between your Apple Watch and Melomania Touch.

Manual Pairing:

  1. Turn on Bluetooth on selected device.

  2. Remove earphones from charging case and place in ears.

  3. Hold down on either Left or Right Melomania Touch for 8 seconds, this is followed by “Pairing” voice prompt.

  4. Select whichever earphone you pressed in Bluetooth “Other Devices” list.

  5. Wait for voice prompt “Melomania Paired” followed by “Melomania Connected”.

  6. Select audio playback app.

  7. Enjoy listening to your favourite music through the Melomania Touch!

  8. When you are finished with using Melomania Touch, place back in corresponding side in charging case.

  9. If the LEDs slowly fade in and out in red, your Melomania Touch are correctly sat in case.

  10. Removing from the case will initiate auto connection between your Apple Watch and Melomania Touch.

Troubleshoot “Connection Failed”

  • If no playback starts when entering the music app, OR when pressing touch panel once to begin playback and the sound plays but nothing follows. Message will appear: Choose where to play audio: (Melomania Touch R or L, a fix I have found for this is:

  • Selecting this doesn’t seem to do anything and can lead to the master earphone playing the voice prompt “Melomania Disconnected” – followed by an error message on Apple Watch: “Connection Failed”.Make sure Apple Watch is turned on and in range.

  • To fix this, use secondary earphone to enter manual pairing mode, then go to Bluetooth settings and select this as the new master earphone. Playback will then work. And earphones can be used as normal.